Power Washer Spray Set
G352
Instructions for Use
Please read and retain these instructions for future reference
v001:10/06/20
User Instructions
Preparation
Install the battery pack (see Image 1).
Installation
Install long lance (see image 4)
Tip: After the long lance is installed, shake it left and right to check if it is firmly fixed.
Connect PVC hose
Tip: After connecting PVC hose, gently pull the hose to check if it is firmly connected to the machine. If the
hose does not fall off, the installation is in place.
Connect your own hose
1.
Remove the hose connector
2.
Connect the machine to the hose with right connector
Operation
Select water pressure
Start up
Note: When using for the first time, the air in the water pipe must be drained. Put the washer at about
waist height (<1.5 m) and then select high voltage mode. Water enters the water pipe and sprays from the
washing machine then starts cleaning. The entire process takes about 20 seconds.
Choose water spray effect
Note: The water effect should be selected according to the working condition. Rotating nozzle, 0-40° for
cleaning and watering.
Warning: Do not rotate nozzle after turning on the machine
Cleaning
Warning: Do not use turbid, muddy or corrosive water sources (including window cleaning fluid, plant
nutrients, fertilizer etc.) Note: Please rinse with water after using the sea water.
Optional accessory use
This product comes with some accessories. Do not use the machine when there is no accessory attached.
1.Watering can
To provide deep cleaning cleaner; connect to the machine
2. Brush Attachment
To wash irregularities of a car's outline.
Maintenance and Repair
Please remove the battery pack from the machine before maintenance and repair.
Maintenance of water pipe filter maintenance and repair.
First take the filter cover down, then remove dirt on it, rinse all parts with clean water and finally put the
