Victor E Lock ER-043, Инструкция по установке и руководство пользователя

Страница: 10 / 18

Step2
PREPARE THE PARTS BEFORE INSTALLTION
a. Check if door is Right or Left hand. If you are facing the outside of the door and the hinge is on the right, it is a Right
Hand door (and visa versa). Make sure your Kit matches your door type (Figure 8).
b. Set the Rotor to correct position. R is for right hand and L is for left hand (Figure 9).
c. Unscrew 2.0mm Machine Screws on both upper sides of Inner Escutcheon and remove Escutcheon.
d.
Insert Push Pin into pinhole on left side of Inner Escutcheon then depress to release and remove Battery Housing
(Figure 10).
Rotor
ER-043 Manual Rev. B Date 04/28/06 Page 10
INSTALLATION INSTRUCTION MODEL ER-043
RH
Right Hand
LH
Left Hand
LHR
Left Hand
Reverse
RHR
Right Hand
Reverse
INSIDE
OUTSIDE
Figure 8
Figure 10
Rotor
Figure 9
INSERT PUSH PIN
AND REMOVE
BATTERY HOUSING
US PAT. #6725693B2 US PAT. #6725693B2
LEFT HAND
RIGHT HAND
UNSCREW SCREWS ON
BOTH SIDE TO REMOVE
INNER ESCUTCHEON