HAZARD IDENTIFICATION
Definitions for identifying the various hazard
levels are provided below .
This safety alert symbol indicates
important safety messages . When
you see this symbol, be alert to the
possibility of personal injury .
Carefully read and fully understand the message
that follows .
DANGER
• The use of the word “DANGER” identifies
an immediate hazard with a likelihood
of death or serious personal injury if
instructions, including recommended
precautions, are not followed.
WARNING
• The use of the word “WARNING”
identifies the presence of hazards
or unsafe practices that could result
in death or serious personal injury if
instructions, including recommended
precautions, are not followed.
CAUTION
• The use of the word “CAUTION”
identifies possible hazards or unsafe
practices that could result in personal
injury and product or property damage
if instructions, including recommended
precautions, are not followed.
NOTICE
• The use of the word “NOTICE” identifies
special instructions that are important
but not related to hazards.
OPERATOR SAFETY
INSTRUCTIONS
The PC3110 Cut and Mark Tool is designed to
be used, in conjunction with a power drive, for
the sole purpose of preparing plain-end pipe
for joining . These instructions, in addition to
the instructions provided by the power drive
manufacturer, shall be read and understood by
each operator PRIOR to working with the tool .
These instructions describe safe operation of
the tool, including set up and maintenance .
Each operator shall become familiar with the
tool’s operations, applications, and limitations .
Particular care shall be given to reading and
understanding the dangers, warnings, and
cautions described throughout these operating
instructions .
Use of this tool requires dexterity and
mechanical skills, as well as sound safety
habits . Although these tools are designed and
manufactured for safe, dependable operation,
it is difficult to anticipate all combinations of
circumstances that could result in an accident .
The following instructions are recommended
for safe operation of this tool . The operator is
cautioned to always practice “safety first”
during each phase of use, including set up
and maintenance . It is the responsibility of the
lessee or user of this tool to ensure that all
operators read this manual and fully understand
the operation of this tool .
Store this manual in a clean, dry area where
it is always readily available . Additional copies
of this manual are available upon request
through Victaulic, or can be downloaded at
victaulic .com .
DANGER
1. Avoid using the tool in potentially
dangerous environments.
Do not expose
the tool to rain, and do not use the tool in
damp or wet locations . Do not use the tool
on sloped or uneven surfaces . Keep the
work area well lit . Allow sufficient space to
operate the tool properly .
TM-PC3110_4
REV_C
TM-PC3110
/ Operating and Maintenance Instructions Manual
Содержание PC3110
Страница 2: ......
Страница 23: ...This page intentionally blank ...
