20
www.victa.com.au
Rider Maintenance Items
Accessing the Engine Compartment
Lift up on the back edge of the seat deck to access the
engine compartment.
Clean Debris from Rider and Engine Compartment
CAUTION: If debris is not removed from the engine
compartment and other hot surfaces, it creates a fire
hazard.
Before starting the unit at the beginning of the
mowing session, remove any grass clippings, dirt,
leaves, or other debris from the unit. Also clean out the
engine compartment.
Clean Debris from Engine Cooling Areas and Air
Filter
CAUTION: If debris is not removed from the engine
compartment and other hot surfaces, it creates a fire
hazard.
Before starting the unit at the beginning of the
mowing session, lift the seat deck and clean any debris
from the intake screen on top of the engine (A, Figure
11), exposed engine cooling fins, and around the air filter
assembly. Also open the air filter cover (B) and remove
any debris that has accumulated in the air filter
compartment.
Check Tire Pressure
Tire pressure should be checked periodically, and
maintained at the levels shown in Figure 12. Note that
these pressures may differ slightly from the “Max
Inflation” stamped on the side-wall of the tires. The
pressures shown provide proper traction, improve cut
quality, and extend tire life.
Tire
Pressure
Front
18-20 psi (1,24-1,38 bar)
Rear
10-12 psi (,69-,83 bar)
Figure 11. Engine Compartment
Figure 10. Accessing the Engine Compartment
Figure 12. Tire Pressures
A
B
WARNING
Move the ground speed levers to START/PARK
positions, engage the parking brake, turn the
mower blades OFF, turn the ignition switch OFF,
and wait for all moving parts to stop before
accessing the engine compartment or performing
any maintenance procedures.
Not
for
Reproduction