C
H
O
K
E
15
Service
Servicing requires extreme care and knowledge and should be performed only by a qualified
service technician. For service we suggest you return the product to your nearest Authorized
Service Dealer for repair. When servicing, use only genuine replacement parts.
• Keep the handles dry, clean, and free of oil and grease.
• In order to reduce the risk of fire, keep the motor free of grass, leaves, and debris build-up.
• Check the blade and motor mounting bolts for proper tightness frequently. Visually
inspect blade for damage (e.g., bent, cracked, or worn).
• For best and safest performance, maintain the mower with care. Keep the mower blade
sharp and clean. Mower blades are sharp, and can cut. Wrap the blades or wear gloves,
and use extra caution when servicing.
• Keep all nuts, bolts, and screws tight in order to be sure that the equipment is in safe
working condition.
• Never tamper with safety devices. Check them regularly for proper operation.
NOTE:
Refer to warranty card supplied with this product for service contact details.
Replacing the Cutting Blade
Fig. 12
Fig. 13
NOTE: Refer to figure 12&13.
WARNING
Always protect your hands by wearing heavy gloves and/or wrapping the cutting edges with
rags or other materials when performing any maintenance on the blades.
ALWAYS remove the battery when servicing or transporting the mower.
1. REMOVE BATTERY.
2. While wearing leather padded gloves, wedge a block of wood between the blade and the
mower deck in order to prevent the blade from turning when the bolt (1) is being removed.
3. Using an adjustable wrench or 27 mm socket, loosen the bolt (1) and remove the blade (2).
Turn the bolt “COUNTERCLOCKWISE” to loosen it and “CLOCKWISE” to tighten it.
4. Remove the bolt (1) and the blade (2).
5. To re-install the blade, position the blade with the cutting edges toward the ground.
Assemble the bolt as shown. Using a 27 mm socket or wrench, turn the blade nut
"CLOCKWISE” in order to secure the blade.
1
2
Not for
Reproduction
