20
Blade Replacement
Model
All 16in Steel Models
For Your Safety
s
Never use the mower unless the grasscatcher or the guards supplied by the
manufacturer are in position.
s"EFO
re starting the mower check blades and bolts for damage or wear.
s
If you strike an obstruction, stop the engine and check the blades for damage.
Worn and damaged blades are major hazards.
DO NOT lay mower on side (4 Stroke models).
s
CAUTION:
"E
sure to disconnect and ground the spark plug wire before working on
the cutting blade to prevent accidental engine starting. Protect hands by using heavy
duty gloves or a rag to grasp the cutting blade.
We recommend that the blade bar, washer and bolt be replaced when changing the
blade bar tighten to 45-55Nm 32-40ft lbs.
WARNING: Periodically inspect the blade adaptor for cracks,
especially if you strike a foreign object. Replace when necessary.
Use only genuine replacement parts made and guaranteed by Victa.
Insist on them from your parts and service dealer.
Detailed fitting instructions are printed on genuine Victa blade packs.
Use of non-genuine blades may void your warranty, and could result
in damage or injury.
s
"EFO
re reassembling the blade and the blade adapter to the unit, lubricate the engine
crankshaft and the inner surface of the blade adapter with light oil. Install the blade adapter
on the crankshaft. Refer to the figure above. Place the blade with the part number facing
away from the adapter. Align the washer over the blade and insert the hex bolt.
Tighten the hex bolt to 45-55Nm 32-40ft lbs.
"LADE
adapter
"LADE
Washer
Hex
"OL
t
"LADEADAPTER
"LADE
Washer
Hex bolt
Not
for
Reproduction
