background image

12

www.victa.com.au

Operation

If you have any problems operating your pressure washer,
please call the pressure washer helpline at 

1800 356 632

.

Pressure Washer Location

Carbon Monoxide Poisoning

Risk of Fire Clearances

How to Start Your Pressure Washer

To start your pressure washer for the first time, follow these
instructions step-by-step. This starting information also
applies if you have let the pressure washer sit idle for at least
a day.

1. Place pressure washer near an outside water source

capable of supplying water at a flow rate greater than
11.35 l (3.0 gallons) per minute and no less than
1.38 BAR (20 PSI) at pressure washer end of garden
hose. DO NOT siphon supply water.

2. Check that high pressure hose is tightly connected to

spray gun and pump. See 

Assembly

section.

3. Make sure unit is in a level position.

4. Connect garden hose to water inlet on pressure washer

pump.

NOTICE

DO NOT run the pump without the water supply

connected and turned on.

• Damage to equipment resulting from failure to follow this

instruction will void warranty.

5. Turn ON water, point gun in a safe direction, press red

button and squeeze trigger to purge pump system of air
and impurities.

6. Attach nozzle extension to spray gun. Tighten by hand.

7. Choose spray tip you want to use, pull back on collar of

nozzle extension, insert spray tip and release collar. Tug
on spray tip to make sure it is securely in place. See

How to Use Spray Tips

.

WARNING   

Exhaust heat/gases could ignite

combustibles, structures or damage fuel tank
causing a fire, resulting in death, serious injury
and/or property damage.

• Keep at least 1.5 m (5 ft) clearance on all sides of pressure

washer including overhead.

WARNING   

POISONOUS GAS HAZARD. Engine

exhaust contains carbon monoxide, a poisonous
gas that could kill you in minutes. You CANNOT
smell it, see it, or taste it. Even if you do not

smell exhaust fumes, you could still be exposed to carbon
monoxide gas.

• Operate this product ONLY outside far away from windows,

doors and vents to reduce the risk of carbon monoxide gas
from accumulating and potentially being drawn towards
occupied spaces.

• Install battery-operated carbon monoxide alarms or plug-in

carbon monoxide alarms with battery back-up according to the
manufacturer’s instructions. Smoke alarms cannot detect
carbon monoxide gas.

• DO NOT run this product inside homes, garages, basements,

crawlspaces, sheds, or other partially-enclosed spaces even if
using fans or opening doors and windows for ventilation.
Carbon monoxide can quickly build up in these spaces and can
linger for hours, even after this product has shut off.

• ALWAYS place this product downwind and point the engine

exhaust away from occupied spaces.

If you start to feel sick, dizzy, or weak while using this product,
shut it off and get to fresh air RIGHT AWAY. See a doctor. You
may have carbon monoxide poisoning.

Exhaust Port

Pointed away from

occupied spaces

Not 

for  

Reproduction

Содержание 2500 PSI

























Отзывы: