background image

Limitation of Warranties

Information in this document is believed to be accurate and reliable. HOWEVER, THIS INFORMATION 
IS PROVIDED “AS IS” AND WITHOUT ANY WARRANTIES, EXPRESSED OR IMPLIED, AS TO THE 
ACCURACY OR COMPLETENESS OF SUCH INFORMATION.  VICOR SHALL HAVE NO LIABILITY FOR THE 
CONSEQUENCES OF USE OF SUCH INFORMATION.  IN NO EVENT SHALL VICOR BE LIABLE FOR ANY 
INDIRECT, INCIDENTAL, PUNITIVE, SPECIAL OR CONSEQUENTIAL DAMAGES (INCLUDING, WITHOUT 
LIMITATION, LOST PROFITS OR SAVINGS, BUSINESS INTERRUPTION, COSTS RELATED TO THE REMOVAL 
OR REPLACEMENT OF ANY PRODUCTS OR REWORK CHARGES).

Vicor reserves the right to make changes to information published in this document, at any time 
and without notice. You should verify that this document and information is current. This document 
supersedes and replaces all prior versions of this publication.  

All guidance and content herein are for illustrative purposes only. Vicor makes no representation or 
warranty that the products and/or services described herein will be suitable for the specified use without 
further testing or modification. You are responsible for the design and operation of your applications 
and products using Vicor products, and Vicor accepts no liability for any assistance with applications or 
customer product design. It is your sole responsibility to determine whether the Vicor product is suitable 
and fit for your applications and products, and to implement adequate design, testing and operating 
safeguards for your planned application(s) and use(s). 

VICOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED OR WARRANTED FOR USE IN LIFE SUPPORT, 
LIFE-CRITICAL OR SAFETY-CRITICAL SYSTEMS OR EQUIPMENT. VICOR PRODUCTS ARE NOT CERTIFIED 
TO MEET ISO 13485 FOR USE IN MEDICAL EQUIPMENT NOR ISO/TS16949 FOR USE IN AUTOMOTIVE 
APPLICATIONS OR OTHER SIMILAR MEDICAL AND AUTOMOTIVE STANDARDS. VICOR DISCLAIMS 
ANY AND ALL LIABILITY FOR INCLUSION AND/OR USE OF VICOR PRODUCTS IN SUCH EQUIPMENT OR 
APPLICATIONS AND THEREFORE SUCH INCLUSION AND/OR USE IS AT YOUR OWN RISK.

Terms of Sale

The purchase and sale of Vicor products is subject to the Vicor Corporation Terms and Conditions of Sale 
which are available at: 

(http://www.vicorpower.com/termsconditionswarranty)

Export Control

This document as well as the item(s) described herein may be subject to export control regulations. 

Export may require a prior authorization from U.S. export authorities.  

10/18

 

Rev 1.2 

Page 6

Contact Us: 

http://www.vicorpower.com/contact-us

Vicor Corporation

25 Frontage Road

Andover, MA, USA 01810

Tel: 800-735-6200

Fax: 978-475-6715

www.vicorpower.com

email

Customer Service: 

[email protected]

Technical Support: 

[email protected]

©2018 Vicor Corporation. All rights reserved. The Vicor name is a registered trademark of Vicor Corporation.

All other trademarks, product names, logos and brands are property of their respective owners.

Содержание VI Chip BCM








Отзывы: