ZigBee Pro Module Installation Guide
VT8000 Series Room Controllers
Optional ZigBee Pro Module (VCM8000V5000P)
Страница 1: ...ZigBee Pro Module Installation Guide VT8000 Series Room Controllers Optional ZigBee Pro Module VCM8000V5000P ...
Страница 2: ...om Controllers Motherboard from casing and turn over 4 Locate gap in upper right corner of Room Controllers Motherboard and locate holes to insert ZigBee Pro module to Motherboard Figure 2 5 Align connector pins on ZigBee Pro module with holes on Motherboard NOTE ensure alignment of pins is correct so as to not damage ZigBee Pro module 6 Gently press ZigBee Pro module into Room Controllers Motherb...
Страница 3: ...d MPM coordinator if used to On 2 Go to first unused Zone screen in Wireless Ecosystem section of Room Controller s interface 3 Insert battery or remove pull tab for contact sensors to activate ZigBee sensor 4 Verify sensor has joined network and Paired field status reads Yes on Zone screen 5 Set the Set function to parameter 6 Set Permit Join on Room Controller or networked MPM coordinator if use...