4
|
Installation and Operation Guide
Installing the Upper Panel
The upper panel that denotes the button functions is supplied and may be
affixed to the keypad or remain secured by the supplied clear plastic overlay.
By default, the standard keypad is set for right-handed users, with the joystick
on the right and the Jog/Shuttle on the left. This layout can be inverted to
accommodate left-handed (joystick on the left) control. After the physical
installation of the upper panel, perform simple procedure to reverse the
functionality (Configuration section of this manual).
1. To affix the panel, remove the upper panel provided on the keypad
buttons.
2. Remove the adhesive backing on the upper panel.
3. Affix the adhesive panel (right or left-handed orientation), making sure
that it does not touch the keys. A protective clear plastic overlay is
provided; place it over the buttons to shield the upper panel from wear
and tear.
4. To confirm the layout and the operating mode, follow the selection
procedure that follows in Configuration.
