XX159-07-00 Rev 1010 VN-301T Single-Channel Digital Video Server
Chapter 11 – Technical Information
•
25
Chapter 11 – Technical Information
Table 11-1: Technical Information
Input Voltage
24 VAC ±25%, 50/60 Hz nominal
NOTE:
Vicon recommends the use of uninterruptible power supply systems (UPS) to prevent
voltage fluctuations that can affect operation and cause damage to the equipment.
Current
300 mA @ 24 VAC
490 mA @ 18 VAC
220 mA @ 32 VAC
Power Consumption
7.2 W nominal
Heat Equivalent
0.4 btu/min (0.1 kg-cal/min)
NOTE:
These figures represent the conversion of 100% of the electrical energy to heat. Actual
percentage of the heat generated will be less and will vary from product to product. These
figures are provided as an aid in determining the extent of cooling required for an installation.
Radio-Frequency
Emission Standard
FCC Class A
Indicators and
Connectors
Power Indicator:
Red LED
Network Connectivity:
Green LED
Network Activity:
Amber LED
Power Connector:
2-pin terminal block
Analog Video In:
BNC-F
Alarm/Audio:
4-pin terminal block
Network:
RJ-45 jack
PTZ:
4-pin terminal block
Mounting
Mounting plate provided with 4 mounting screws
Dimensions Height:
4.5 in. (114 mm),
Width:
8.0 in. (203 mm),
Depth:
7.5 in. (191 mm)
Weight
0.85 lb (0.4 kg)
Operating
Temperature Range
32 to 122° F (0 to +50° C)
Humidity
Up to 90% relative, noncondensing
LAN Interface
100 Mbps, TCP/IP Unicast
Number of Video
Channels
1, over LAN connection
Video Transmission
Rate
30 fps
Alarm
1 dry contact NO/NC input
Audio
1 line-level microphone input; 0 dbm output, 32 KHz bandwidth, 600 ohm impedance and 2 V
RMS (1 V p-p) output dynamic type
PTZ
1 RS-422/485 simplex protocol connection
Video Bandwidth
1.5 Mbps
Содержание VN-301T
Страница 2: ......
Страница 8: ......
Страница 20: ...12 Chapter 4 Operation XX159 07 00 Rev 1010 VN 301T Single Channel Digital Video Server...
