Vicon VM621-5, Руководство пользователя

Страница: 9 / 13

S-VHS PIN DESCRIPTION (Separated Y/C signal IN/OUT)
PIN No.
1
2
3
4
DESCRIPTION
GND
GND
Y Signal IN or OUT
C Signal IN or OUT
4
2 1
3
Note : The impedance is automatically set to 75 ohm by the input of a signal
on the input connector while operating in a single connection mode.
However, if a cable is connected to the output connector, the
connection is placed into the open status by the multiple connection
and high impedance automatically selected.
Caution : Do not leave an unused cable connected to the monitor.
If a single cable is used then it must be connected to the input
connector for the 75 ohm auto-termination selector to function
properly.
C. AUDIO LINE
Input/output terminals for the audio signal.
A and B must be selected with Video A and Video B respectively.
Note : The monitor will automatically determine NTSC and PAL video inputs.
- 9 -