Vicon VM-642LED, Инструкция по установке и эксплуатации

Страница: 4 / 27

Important Safeguards – Indoor Use
GRAPHIC SYMBOL EXPLANATION
The lightning bolt symbol alerts the user to the presence of dangerous
voltage that may present the risk of electric shock.
The exclamation point symbol alerts the user to the presence of
important operating and maintenance instructions.
WARNING
To reduce a risk of fire or electric shock, do not expose this product to
rain or moisture.
1.
Read Instructions - Read all safety and operating instructions
before the product is operated.
2. Retain Instructions - Retain all safety and operating instructions
for future reference.
3. Heed Warnings - Pay attention to all product warnings.
4. Follow Instructions - Follow all operating instructions.
5. Installation and W iring - The equipment and all devices connected
to it shall be installed and wired in accordance with the National
Electrical Code, ANSl/NFPA 70.
6. Cleaning - (Do not use caustic , abrasive or aerosol cleaners)
a) For units that CAN BE DISCONNECTED from the power source,
use a damp cloth for cleaning.
b) For units that CANNOT BE DISCONNECTED from the power
source, use a damp cloth for cleaning and do not allow
moisture or liquids to enter vents.
7. Attachments - Use only UL Listed Vicon recommended attachments
to prevent unit damage and personal injury.
8. Water and Moisture - Use only products designed for outdoor
environments where they will be exposed to water or moisture.
9. Accessories - Do not place the unit on an unstable surface to
avoid falling. Use only UL Listed Vicon recommended mounting
accessories.
10. Ventilation - Do not block ventilating slots and openings as they
ensure reliable operation. Do not place the unit near a heat source
or into an enclosure unless recommended by Vicon.
11. Grounding - Only products equipped with a 3-prong grounded
plug should be inserted into a grounded power outlet. Contact an
electrician to replace an obsolete outlet. Do not force a plug into a
non-grounded outlet.
12. Power Cord Protect ion - Power supply cords should not be routed
in trafficked areas or in tight spaces where they will be pinched or
used to bear weight. Allow some slack in the cord where it enters
the unit.
13. Lightning - Disconnect the product from its power source and cable
system when possible to prevent damage due to lightning and
power-line surges.
14. Power Lines • Do not locate outside cables over power or utility
lines where they can fall and make direct contact. Contact with
power lines can be fatal.
15. Overloading - Do not overload wall outlets and extension cords to
prevent risk of fire and electric shock.
16. Object and Liquid Entry - Never probe through, or spill liquid into,
enclosure openings to prevent risk of fire or electric shock.
17. Servicing - Refer all servicing to qualified service personnel.
18. Damage Requiring Service - Obtain service when:
a) The power-supply cord or plug is damaged.
b) Objects have fallen or liquid has been spilled into the product.
c)
The product is not designed for outdoor use and has been
exposed to water or moisture.
d) The product does not operate per the operating instructions.
Perform Vicon recommended adjustments, modifications and
troubleshooting only to avoid unit damage and personal injury.
e) The product has been dropped.
f) The product shows a significant change in performance.
19. Replacement Parts - Use only Vicon specified replacement parts or
an approved equivalent to prevent unit damage and injury.
20. Safety Check - Request safety checks to be performed following
repair or maintenance to verify proper operation.
21. ESD Precaution - Take all normal electrostatic discharge precautions
to avoid component damage during installation and operation.
22. For 230 VAC Devices Only - When the disconnect device is not
incorporated in the equipment or when the plug on the power
supply is intended to serve as the disconnect device, follow the
guidelines below:
a) For permanently connected 230 VAC units, a readily accessible
disconnect device must be incorporated into the site wiring.
b) For 230 VAC units with a plug, the outlet must be installed near
the unit and be easily accessible.
23. For Devices Requiring a Separate Power Supply - All devices
requiring a separate power supply shall be powered by a UL
Listed,Class 2 Power Supply.
24. Lithium Batteries Only:
WARNING
Fire and burn hazard. Do not recharge, disassemble, heat
above 212°F or incinerate. Keep battery out of reach of
children and in original package until ready to use. Dispose
of used batteries promptly.
Risk of explosion if battery is replaced by incorrect type.
Dispose of used batteries according to the instructions.
25. For Rack-Mounted Units Only – The following precautions apply to
all rack-mounted units.
a) Elevated Operating Ambient - If installed in a closed or multi-
unit rack assembly, the operating ambient temperature of
the rack environment may be greater than room ambient.
Therefore, consideration should be given to installing the
equipment in an environment compatible with the maximum
ambient temperature (Tma) specified by the manufacturer.
- 2 -
CAUTION : TO REDUCE THE RISK OF ELECTRICAL SHOCK,
DO NOT REMOVE COVER (OR BACK). NO USER:
SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL