Vicon ViconNet VN-NVR Shadow, Инструкция по установке и эксплуатации

Страница: 9 / 34

8
|
ViconNet VN-NVR Shadow Installation and Configuration Guide
Mounting
Rack
The NVR Shadow was designed to be mounted in a standard 19-inch
(483 mm) wide vertical rack. A rail kit is installed onto the NVR to connect it
to the rack. Hardware and installation instructions on how to use this kit are
provided with the rail kit. The rail mounting kit is included to provide extra
support for the unit in the rack.
This rail kit MUST be used.
Note
Rack mount ears and handles are installed on the NVR Shadow for ease of
installation.
It is recommended that at least 1 RU of space [1.75 in. (44.45 mm)] be left in
between multiple units mounted in the same rack for cooling purposes.
Warning
Failure to leave space for cooling between recorders may result in
malfunctioning and possible failure of the unit.
Install the two (2) rail kit mounting brackets onto the sides of the NVR
Shadow. Use the instructions supplied with the rail kit. The brackets have
slots and holes that fit directly onto the hardware on the sides of the unit.
Refer to figure below.
Note
Use the square holes in the rail kit for mounting. If this is not convenient, it
may be necessary to use a square hole to round hole adapter.