7
Chapter 2. Basic Operations
2.1. Power ON/OFF
2.1.1. Power ON
When connecting power cable, power LED light on front panel of DVR turns to red color and this means that
the DVR is on stand-by mode and ready for power on. At this moment, when pressing power key button on front
DVR, power LED light turns into green color, showing the DVR power is actually on. When DVR booting process
is completed, OSD (On Screen Display) menu is displayed on screen. At the same time, you can hear the buzzer
sound, alerting that DVR booting process is completed. But OSD menu with ON setting features only will be
displayed. Once the OSD menu is displayed on the screen, it means the DVR booting process is normal. Now the
user can manipulate the DVR at his convenience.
2.1.2. Power OFF
When powering off the DVR system, please press the power key button on front panel of DVR. Then you will
see the password input dialog box pop up for your password input (Default : 111111) to turn off the DVR system.
Afterward the power LED display on front panel of DVR becomes red color, showing stand-by mode.
2.1.3. Date Time Adjustment
This is to input the date time of DVR system. After changing the date time of DVR, you must press OK key button
on date time menu to activate the date time application.
2.1.4. Password Setup
This is to change the password of DVR system. Password configuration can be made with 4 to 8 digit alpha-
nummeric combination.
2.1.5. Network Setup
Select the appropriate network type from the network setup menu. Select the network type among STATIC, DHCP,
PPPoE to fit to the appropriate network environment where the DVR system is installed.
2.2. Recording
2.2.1. Menu Setup for Recording
You can enter into recording setup and select the details. Firstly select the resolution. Available resolution
choices are 720x480, 720x240, 360x240 (NTSC) and 720x576, 720x288, 360x288 (PAL). Audio recording option,
recording quality per channel are available as well. Especially we have adopted "ALL" concept which you can
control 4 channels at the same time. Recording qualities are Enhanced, Normal, Fine, and Super Fine (4 options).
Recording speed is up to 120 fps (NTSC) and 100 fps (PAL). In this category the user can set up the individual
options per channel, or the same application to all channels at his own convenience. Finally the user can also
select recording condition. For more detailed information, please refer to
Section 3.2, “Recording Setup Menu
2.2.2. Recording Condition Setup
Recording conditions are composed of MANUAL, CONTINUOUS, MOTION, SENSOR, SENSOR,
SCHEDULE and CONEVENT. When the recording condition is met according to selected recording
mode, then the red-colored icon on top right corner of each channel on screen is displayed only when the video
signal is available. Whenever the Record button on MANUAL recording is pressed, recording goes ON/OFF. For
more detailed information, please refer to
Содержание VDR-704C
