LENS-IRIS level control
Monitor screen
LEVEL control direction
To increase the brightness
clockwise
To decrease the brightness
counterclockwise
7
AWB HOLD push button
●
Use the AWB HOLD Push Button:
1. When a subject is lighted by many types of light.
2. When you use a special lamp, such as a sodium lamp or mercury vapor lamp.
●
How to use:
1. Select AWB on mode select switch
8
.
Set Pole 5 to OFF for AWB,
2. Display a full screen of white paper or white subject on the monitor.
3. Adjust the screen color to be white pushing AWB HOLD push button.
8
MODE SELECT SWITCH
1. INT/LL switch
This camera can operate independently, using its internal crystal-controlled sync
generator, or it may be synchronized using line-locking.
To select one or the other of these sync modes, set the DIP switch on the rear panel to
either INT or LL. Pole 1 is set to ON for LL and OFF for INT.
If line-locking is selected, all the cameras in the system must be adjusted to begin the
video field scan at the same time. This is described in procedure
9
,
⑩
.
2. Pole 2 is NOT USED.
6
XX135-00-00 Rev 1103 VC565DN Cameras
