CONNECTORS AND CONTROLS
lens connector for DC-drive lens
It supplies the control signals to the DC-drive
lens.
3 1
Back of camera
PIN 4 2 3 1 Ground Drive(+) Damp(+) Damp(-) Signal4 2 ,
or the plug cover
does not fit properly,
cut this rib away
Lens plug (supplied)
Backlight compensation (BLC) ON/OFF switch
If the subject you wish to view is too dim because of a bright
background, set the BLC switch to ON to compensate for the bright
background.
With BLC on, the background brightness may saturate in some
cases. This function may not operate properly if the object is too
small compared to the area of the background. This function can
be used with either the linear shutter(EE mode) or an
lens mode).
WITH BLC OFF
WITH BLC ON
