12
the router to allow access to the network camera. This is enabled from Setup >
System > Network > NAT.
For more information,
refer to section “System
> Network >
NAT” of the User manual
.
3.3
Setting the admin password over a secure connection
To gain access to the product, the password for the default administrator user must be set. This is done in
the “Admin Password”
dialog, which is displayed when the network camera is accessed for the setup at the
first time. Enter your admin name and password, set by the administrator.
NOTE:
The default administrator user name and password is
“
ADMIN
”
and the password is “1234”
. If the
password is lost, the network camera must be reset to the factory default settings. See section
“Resetting
to
the factory default
settings”
for more details
To prevent network eavesdropping when setting the admin password, this can be done via an encrypted
HTTPS connection, which requires an HTTPS certificate (see NOTE below). To set the password via a standard
HTTP connection, enter it directly in the first dialog shown below. To set the password via an encrypted HTTPS
connection, see section
“System
> Security >
HTTPS”
of User Manual.
NOTE:
HTTPS (Hypertext Transfer Protocol over SSL) is a protocol used to encrypt the traffic between web
browsers and servers. The HTTPS certificate controls the encrypted exchange of information.
Содержание V980B Series
Страница 16: ......
