11.2 Motion
Motion Detection
Motion detection is used to generate an alarm whenever movement occurs within the video image.
A total of 4 motion detection zones can be configured.
Configuring Motion Detection
1. Click
Motion
in the
Event
menu.
2. Click Area1-4 button for the area to be defined and select the corresponding area for motion
detection by clicking the relevant color box.
3. Click the box on the video image where the motion area is to be located and adjust the size of the
area by dragging the outlined box across and down in one motion.
4. Adjust the Object Sensitivity from the drop down list, 1-10. The Sensitivity list only displays when
an area is selected; it is not visible when All View is selected. Use the Selectall button to have the
entire scene in the selected area. Deleteall is available to eliminate all selected areas.
5. Click
Save
. When motion occurs in the defined area, a red dot appears on the Live video.
NOTE:
Using the motion detection feature will consume more of the cameras resources, and this
could decrease the camera’s overall performance, depending on your settings.
