Vicon V700 Скачать руководство пользователя страница 11

7

SINGLE CHANNEL VIDEO SYSTEM 

ELECTRICAL
Power Requirements:

Surface Mount: 

12 - 16 VAC 50/60 Hz
or 12 - 16 VDC.

Rack Mount:

13.5 - 16 VDC.

Current Requirement:

35 m A.

Power Consumption:

1.4 W.

Heat Equivalent:

0.08 btu/min (0.02 kg-cal/min).

Note: These figures represent the conversion of 100% of the elec-
trical energy to heat. Actual percentage of heat generated will be
less and will vary from product to product. These figures are pro-
vided as an aid in determining the extent of cooling required for an
installation.

Safety Standard:

UL 1950.

Radio Frequency 

Emissions Rating:

FCC Class A.

European Community

(CE) Standards:

EN60950.

VIDEO
Number of Channels:

1.

Modulation Type:

Frequency Modulation (FM).

Formats Supported:

NTSC and PAL.

Full System Bandwidth:

8 MHz per channel.

Horizontal Video Resolution:

>640 TV lines.

Input/Output Impedance:

75 ohms.

Optimum Input Signal:

1 V p-p nominal composite video.

Output Signal Level:

1 V p-p nominal, composite video, 
unity gain, ±5%.

Differential Phase:

1.7º.

Differential Gain:

1.6%.

Signal-to-Noise Ratio:

>50 dB (at max path loss).

Interconnection Distance:

Video devices to transmitter:

100 ft (30 m).

Receiver to video devices:

100 ft (30 m).

Note: RG59/U coaxial cable, Belden No. 9259 or equivalent, is
recommended for video interconnection.

OPTICAL
Maximum 

Optical Attenuation:

13 dB.

Gain Control:

Fully automatic optical (OAGC).

Optical Wavelength:

850 nm.

Fiber Type:

62.5 um.

Operating Distance:

3.2 mi (5.2 km).

Note: Operating distance is approximate and will be affected by
the type and number of splices in the fiber and by the exact type
of fiber used.

CONNECTORS AND INDICATORS
Optical Connector:

ST type.

Video Connector:

BNC.

Power Connector:

Detachable screw terminal.

Level/Loss™:

Bicolor LED.

Video: Bicolor 

LED.

Power:

Green LED.

MECHANICAL
S

URFACE

M

OUNT

M

ODULES

Dimensions:

Length:  4.9 in. (125 mm). 
Width:

3.7 in. (94 mm).

Height: 1.2 in. (30 mm).

Weight:

0.3 lb (0.14 kg).

Shipping Dimensions:

Length: 6.3 in. (160 mm).
Width:

5.0 in. (127 mm).

Height: 1.3 in. (33 mm).

Shipping Volume:

0.024 cu ft (0.00067 cu m).

Shipping Weight:

0.5 lb  (0.23 kg).

Construction:

Aluminum.

Finish:

Black semigloss paint.

Mounting Method:

4 No. 6 (3 or 3.5 mm) screws.

R

ACK

-

MOUNT

C

ARDS

Module Width:

1 slot, 1.0 in. (25.4 mm).

Weight:

0.60 lb (0.27 kg).

Shipping Dimensions:

Length: 9.75 in. (247.7 mm).
Width:

5.25 in. (133.4 mm).

Height: 1.0 in. (25.4 mm).

Shipping Volume:

0.03 cu ft (0.00085 cu m).

Shipping Weight:

0.70 lb  (0.32 kg).

Finish:

Black semigloss paint.

ENVIRONMENTAL
Operating Temperature Range: -40 to 167° F (-40 to 75° C).
Operating Humidity Range:

0 to 95% relative, 
noncondensing.

TECHNICAL INFORMATION

Содержание V700













Отзывы: