FCC NOTICE
WARNING
This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant
to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful in-
terference when the equipment is operated in a com-
mercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruc-
tion manual, may cause harmful interference to radio
communications. Operation of this equipment in a
residential area is likely to cause harmful interference
in which case the user will be required to correct the
interference at his own expense.
If this equipment does cause interference to radio and
television reception, which can be determined by
turning equipment off and on, the user is encouraged
to try and correct the interference by one or more of
the following measures:
. Reorient the receiving antenna.
l
Relocate the equipment with respect to the receiver.
l
Relocate the equipment away from the receiver.
l
Plug the equipment into a different electrical outlet
so that the computer and receiver are on different
branch circuits.
If necessary, the user should consult the dealer or an
experienced radio/television technician for addi-
tional suggestions.
The user may find the following booklet prepared by
the Federal Communications Commission helpful:
“Interference Handbook,” Bulletin CIB-2, ISBN
0-16-045542-l. This booklet is available from the
U.S. Government Printing Office, Superintendent
of Documents, Mail stop
Washington, D.C.
W A R N I N G :
A
Power must be removed from this
unit before removing circuit modules or ribbon
cables.
CAUTION:
This unit contains circuit cards with
A
integrated circuit devices that can be damaged
by static discharge. Take all necessary precau-
tions to prevent static discharge.
TABLE l-l
MATRIX 44 SYSTEM COMPONENTS
MODEL NUMBER
PRODUCTCODE
DESCRIPTION
V4481 SCC-HD
4622-I 0
4622-i 1
Matrix 44 high-density switcher card cage. Includes power supply, output amplifier,
and mother board. Accommodates up to 16 V441 OS-HD switcher cards. Available
in 120 VAC (4622-10) and 230 VAC (4622-l 1).
V441 OS-HD
4164
Video switcher card. Can accommodate up to 8 video inputs per card. The card
cage can accommodate up to 16 V441 OS-HD cards, for a capacity of 128 video
inputs by 8 monitor outputs.
RP-BNC
4641
Rear connector panel with 8 BNC connectors and 1 ribbon cable connector.
RP-RIB
4640
0379
Rear connector panel with 2 ribbon cable connectors.
Address decoder card. Used to define video output (monitor) addresses. Decodes
and routes CPU control signals.
4625
Switcher expander card. Used for camera expansion when number of cameras
exceeds 128.
0381
Rear closure panel. For rear closure of unused card positions.
4638
Terminator for ribbon cable connector.
3260
terminator for BNC connector.
4639
21 -inch coaxial ribbon cable assembly for distributing video between
switcher cards.
4637
coaxial ribbon cable assembly for distributing video signals from
to external devices. Terminated with eight BNC connectors.
1-4
X783-498