6
•
Installation
XX211-21 Rev 1210 V15CCM-IR-2 Series High-Security Cell Cameras
Final Installation
When all connections are made, secure the front plate to the base plate using the security screws previously
removed using no. 20 Torx bit.
Camera/Lens Positioning and Adjustments
The camera is on an adjustable mount so that it can be tilted slightly up and down to give a precise view. The
wide angle 2.5 mm lens enables the camera to view the area with no “blind spots.” Other camera/lens
adjustments are done through the OSD menu. The front plate includes a secure access plate that covers two
connectors, an RJ-45 and a BNC. The RJ-45 connector is used to connect a V15CC-PK hand-help keypad;
the BNC is connected to a monitor to view the programming menus.
4. Remove the two (2) screws securing the access plate with the no. 10 Torx bit.
5. Connect the keypad to the RJ-45 connector. Connect a monitor to the BNC and apply power to it.
6. On the keypad, press the SET key. The menu options display. Follow the menu system as described as
follows. Use the Up, Down, Right, Left keys to navigate the menus.
