64
V1008-WIR-180 User Manual
Chapter 2: Camera Configuration
Copyright © 2018 Vicon Industires Inc. All Rights Reserved.
Event - Relay Handler
Relay Handler Configurations
This section configures the event trigger options for devices connected to
the DI/DO of the camera.
Trigger Alarm:
When a signal is detected from
Alarm in
, the
Alarm out
will be triggered.
Trigger Motion Detection:
When a motion detection event is detected,
the
Alarm out
will be triggered.
Trigger Sabotage Detection:
When a sabotage detection event is
detected, the
Alarm out
will be triggered.
Types
The options are
N.O.
and
N.C
.
Off Time
Configure the seconds from 0 to 30 seconds.
Save
Save button applies the configurations. Click on this button once to confirm
all the settings for the new changes to take effect.
Reset
Click the Reset button to discard all the settings and revert to the previous
settings.
