PHASE
INSTRUCTIONS FOR
INSTALLATION AND OPERATION
MODEL
PHASE EIGHT DESK-TOP ENCLOSURE
1. INTRODUCTION
The information in this instruction manual covers the
installation and
of the
Phase
Eight Desk-Top Enclosures.
The
enclosure offers an attractive and
convenient means of housing Vicon
control and
switching equipment. It houses up to eight
position Phase Eight modules or various combination of
single, double, triple and quadruple modules.
2. INSTALLATION
This unit includes an outer enclosure of
thermo-
plastic and an inner steel card cage rack for Phase Eight
modules, and a rear cover of Noryl thermoplastic. See
Figure 1. The card cage, outer housing, aud trim plates
are preassembled.
2 .
Lead the cables of the Phase Eight module through
the card cage
Insert the modules
the card
cage from the front, fitting the locating ribs on the
modules into the appropriate guide grooves in the
card cage. When fully inserted, each module should
be secured in place with the retaining bracket on the
rear of the module.
When all the Phase Eight modules have been in-
stalled, any unused positions in the
may be closed with appropriate closure panels. The
front closure panels snap into place with spring
clips. Since the
is supplied with a rear
cover, the rear closure panels need not be installed.
3.
4 .
5.
Refer to the instruction manual for specific Phase
Eight modules for complete interconnection
instructions.
Complete all connections between
modules, but do not connect the line cord or cords
to a utility outlet at this time.
Complete all external connections between Phase
Eight modules and other video components. Con-
nect power cords to appropriate power outlets, and
verify that all system interconnections are correct
and that the system functions correctly.
Route all cables leading to external video equip-
ment so that they fit into the cable passage on the
bottom of the rear cover. Attach the rear cover with
the screws provided.
Viwn
part
number
Product specifications subject to
without notice.
Vicon
its logo are registered trademarks of Vicon Industries Inc.
Copyright
Vicon
Inc. All rights reserved.
is a
trademark of
Electric Corp.
INDUSTRIES
INC. 525 BROAD HOLLOW ROAD, MELVILLE, N.Y. 11747 TEL: 516-293-2200
FAX: 516-293-2627
TOLL FREE:
l-800-645-91 16 (OUTSIDE OF NEW YORK)
INFOFAX: i-800-287-1 207
