8
3. To view a camera, double-click a camera entry
or highlight a camera in the list and click the
“Web Page” button (Figure 13.3). The “Live”
page will be displayed through the default
browser (IE recommended). It is also possible to
open Internet Explorer and enter the IP address
of the IQeye camera in the address field of the
browser. If prompted, install the Active X control
(Figure 13.4).
4. To perform further configuration of the
camera click on the “Setup” tab.
NOTE: The default username is “root” and the default password
is “system”.
For additional information and technical
documents, please visit www.vicon-security.com.
14 Factory Reset
If you need to reset the camera for any reason:
1. Press and hold the “Reset” button for 10 seconds
as illustrated in Figure 14.1.
Figure 14.1
Figure 13.3
Figure 13.4
8
