Vicon CE102D, Руководство по установке

Страница: 35 / 71

35
- Remote directory: Specify the path to the directory where the uploaded images will be
stored. If this directory does not already exist on the FTP server, there will be an error
message when uploading.
- User name/Password: Provide your log-in information.
• JPEG Setting
- Pre-event: A pre-event buffer contains images from the time immediately preceding the
event trigger. These are stored internally in the server. This buffer can be very useful when
checking to see what happened to cause the event trigger. Enter the desired total length in
seconds and specify the required frame-rate (fps).
- Post-event: This function is the counterpart to the pre-trigger buffer described above and
contains images from the time immediately after the trigger. Configure as for pre-event.
- Prefix file name: This name will be used for all the image files saved. If suffixes are also
used, the file name will take the form <prefix>.<suffix>.<extension>.
- Additional suffix: Add either a date/time suffix or, a sequence number, with or without a
maximum value.
When the settings are complete, click Save, or click Reset to revert to previously saved settings.

HTTP Server
When the network camera detects an event, HTTP Server is used to receive uploaded image files
and/or notification messages. Check the box to enable the service.
• HTTP
Server Setting
- URL: The network address to the server and the script that will handle the request.
For example: http://192.168.12.244/cgi-bin/upload.cgi
- User name/Password: Provide your log-in information.
• HTTP Server Test