Vicon Andex 714 T Evo, Руководство по эксплуатации

Страница: 32 / 92

Coupling the machine
32
Coupling to the
pending attachment
For coupling to a pending attachment, a height-adjustable parking
stand [+] is required which can be obtained as additional equipment.

See »Height-adjustable parking stand«, page 84.
Proceed as follows:

Take the height-adjustable parking stand [+] out of the transport
holder bracket and fit it to the drawbar.

Adjust the drawbar height using the crank.

Couple the rotary rake to the pending attachment with a fixing pin.

Secure the fixing pin with a safety splint.

Remove the parking stand, place it in the transport holder and
secure.
Crank
Gear box
Parking stand [+]
Incorrect Incorrect
Parking stand in the correct park position
After removing the parking stand from the drawbar, make sure that
it is correctly mounted on the machine. Otherwise, the machine
may be damaged.
For coupling onto the pending attachment, you require a parking
stand [+]. Adjust the drawbar height using the crank. The parking
stand is removable. There is a park position bracket on the gear
box. Make sure that the parking stand is correctly mounted while
in the park position.
Safety splint
Fixing pin