5
Setting Up Your Humidifier
1.
Remove packaging materials. Locate Float Paddle and set aside.This is
required for operation. Keep instructions.
2.
Remove twist tie and extend power cord.
3.
Place on a firm, level, water resistant surface a minimum of 12 inches
(30cm) from any walls.
4.
Plug adapter cord into the port on the back of the unit.
5.
Float Paddle Installation
Line up the Float Paddle with the dashed line float paddle shape on the bottom
of the Reservoir. Place paddle over brackets. It does NOT snap in, it is simply
set in place. The paddle can be gently placed in the brackets.
CAUTION: IMPROPER PLACEMENT OF THE FLOAT PADDLE
COULD RESULT IN LEAKING OR WATER NOT FEEDING TO THE
RESERVOIR.
NOTE: YOU HAVE TWO OPTIONS FOR FILLING YOUR HUMIDIFIER’S
WATER TANK: UNDER THE FAUCET AT THE SINK, OR WITH A
PITCHER OF WATER AT THE HUMIDIFIER.
6.
If filling at the sink, remove Tank using handles on the
sides of the Base, carry to sink and fill with cool water.
OR
If filling at the humidifier, ensure Tank is securely
seated on Base. Open Lid Flap and fill with cool water
using a water pitcher.
NOTE: FILL TANK WITH COOL WATER. DO NOT FILL
WITH WARM OR HOT WATER. DO NOT ADD ESSENTIAL
OILS, MEDICATIONS, OR INHALANT LIQUIDS, SUCH AS
VICKS VAPOSTEAM, TO THE TANK, ONLY THE MEDICINE
CUP. DOING SO COULD CAUSE DAMAGE TO THE
HUMIDIFIER AND VOID THE WARRANTY.
7.
Close the Lid Flap.
8.
If filled at the sink, carry the full Tank back using two
hands and place back on Base.
CAUTION: USE CARE WHEN HANDLING WATER
TANK TO AVOID UNNECESSARY IMPACT. BANGING
OR DROPPING THE WATER TANK COULD RESULT IN
DAMAGE TO THE TANK THAT WILL CAUSE LEAKING.
12” (30cm)
Step 3
Step 4
Step 5
Step 7
Step 8
Step 6
