28
INSTRUCTIONS
Please follow the instructions below in order to use the appliance.
1. When all parts are in installed correct in place, pull the power cord and
connect the appliance to the power supply.
CAUTION:
The yellow point on the cable shows the ideal cable length.
Never exceed the red point.
2. Set the speed control regulator (4) to the lowest level ("MIN").
3. Press the power switch (3) to activate the appliance.
4. Gradually increase the speed to the desired level by adjusting the speed
control regulator (4). During cleaning, you can change the speed volume to
the desired level by setting the speed control regulator (4) to "MIN" for lower
speed or "MAX" for higher speed.
5. Set the floor brush according to the type of area you wish to clean by setting
the floor brush regulator to the correct position.
Position “1” for hard floors:
Set the floor brush regulator as
below image shows so that the
bristles below the floor brush are
extended.
Position “2” for carpets:
Set the floor brush regulator as
below image shows so that the
bristles below the floor brush are
retracted.