Vicair Junior Vector O2, Руководство пользователя

Страница: 5 / 6

6
• Use at high altitude
Notice! Vicair B.V. recommends not to use
the cushion above 2400 m (8000 ft) above
sea level or below 50 m (164 ft) below sea
level. Because each SmartCell is filled with
air, the cushion may behave differently when
used at high altitude or in an airplane. Under
such circumstances, the cushion’s firmness
can be adjusted by removing a few cells from
each compartment.
• Air humidity:
Minimum: 0%, maximum 100%
Ready for use
This Vicair product is ready for use. It has its own
unique filling grade, depending on size and
model. However – if necessary, the filling grade
can be adjusted by removing or adding
SmartCells from/to the various compartments.
You can find the default filling grade on the label
attached to the cushion.
Daily fluff-up
Vicair B.V. recommends to fluff-up your Vicair
cushion before use on a daily basis.
Use of Vicair seat cushions in motor vehicles
Warning!
No testing data is currently available
about the safe use of Vicair wheelchair cushions
in motor vehicles. Therefore we do not
encourage using the wheelchair cushion in
motor vehicles. As an alternative for your Vicair
wheelchair cushion, the Vicair AllRounder O2
(which can be fastened to the user’s body) can
be used if you require additional protection
during transportation.
Re-use - Transferring the product to another user
The product is suitable for repeated use. The
number of times it can be used depends on how
often and in which way the product is used. The
product has to be thoroughly cleaned and
disinfected, before another person is allowed to
use the it. See chapter ‘Maintenance and
cleaning’ for instructions.
Notice! Make sure the product is correctly
adjusted to the other person.
Replacing the cushion cover
Under normal use, Vicair B.V. recommends to
replace the cushion cover every year.
Replacement covers can be purchased
separately.
Disposal
The disposal and recycling of used devices and
packaging must comply with the applicable legal
regulation. Ensure the product is cleaned prior
to disposal to avoid any risk of contamination.
MAINTENANCE AND CLEANING
Warning! Every three months, check the product
for wear and deflated cells. In case of serious
damage, or a large number of deflated cells, do not
continue to use the product. Consult your dealer.
Caution! Do not steam clean or autoclave the
product. It cannot withstand excessive heat or
pressure. When the given cleaning instructions
are not followed, it is very likely that the product
will age more rapid.
Caution! Do not use aggressive or abrasive
cleaners, or sharp objects to clean the cushion.
Caution! Do not place the topside of the Vicair
O2 cushion against the glass of the washer door.
Cleaning the Vicair Junior Vector O2
• Cleaning the Vicair Junior Vector O2 cushion
cover
The cushion cover can be machine washed.
Follow the washing instructions on the label
attached to the inside of the cover. (60
°C=140 °F)
1 2 3 4 5
EN