Vibration Research Corporation VibrationVIEW, Руководство пользователя

Страница: 124 / 333

VibrationVIEW Help 111
© 1995-2005 Vibration Research Corporation. All rights reserved.
If you have previously saved test defaults, using the Save As New Test Defaults command, you
may quickly load these defaults by choosing the "Load New Test Defaults" menu command. This will
load your custom default settings and take you directly to the Settings dialog box, where you can
change test parameters if you choose to do so.
3.4.8 Save As New Test Defaults
Save As New Test Defaults command ( Test menu )
This command will save the current profile as the default settings that are used when a new test is
defined.
If you have particular profile settings that you want to use as a basis for any new test that is defined,
you may set up these parameters, and then choose the Save As New Test Defaults. Once this default
is saved, and "
New Test " is chosen, these saved settings will become the default values in the
Settings dialog box. This will give you the opportunity to start with values that might be similar to all
tests of a particular profile type. Each Test Type can have its own default settings.
If you have saved New Test Defaults, but no longer wish to use them, you may revert back to the
defaults built into the VibrationVIEW software. In the
VibrationVIEW directory on your hard drive, there
will be a file, or files, named "New Test Settings". Delete the "New Test Settings" file with the
extension that matches the profile you wish to delete.
Example: The file, "New Test Settings.vsp", would represent default settings that you chose for a Sine
profile.
3.4.9 Close Test Profile
Close Test Profile ( Test menu )
Closes current test profile.
3.4.10 Run Test
Run Test command ( Test menu )
Use this command to start the current test.
Shortcuts
Toolbar:
Controls:
Keys:
F9
See Also:
Stop Test
111
109
112