Vibration Division 682A09 Скачать руководство пользователя страница 6

Materials 

Authorization 

(RMA) 

Number.  This  RMA  number  should  be 
clearly  marked  on  the  outside  of  all 
package(s)  and  on  the  packing  list(s) 
accompanying  the  shipment.  A  detailed 
account  of  the  nature  of  the  problem(s) 
being  experienced  with  the  equipment 
should  also  be  included  inside  the 
package(s)  containing  any  returned 
materials.

 

A  Purchase  Order,  included  with  the 
returned  materials,  will  expedite  the 
turn-around  of  serviced  equipment.  It  is 
recommended  to  include  authorization 
on  the  Purchase  Order  for  PCB  to 
proceed with any repairs, as long as they 
do  not  exceed  50%  of  the  replacement 
cost  of  the  returned  item(s).  PCB  will 
provide  a  price  quotation  or  replacement 
recommendation  for  any  item  whose 
repair  costs  would  exceed  50%  of 
replacement  cost,  or  any  item  that  is  not 
economically  feasible  to  repair.  For 
routine calibration services, the Purchase 
Order  should  include  authorization  to 
proceed  and  return  at  current  pricing, 
which  can  be  obtained  from  a  factory 
customer service representative.

 

Warranty  -  All  equipment  and  repair 
services  provided  by  PCB  Piezotronics, 
Inc.  are  covered  by  a  limited  warranty 
against 

defective 

material 

and 

workmanship  for  a  period  of  one  year 
from date of original purchase. Contact

 

PCB  for  a  complete  statement  of  our 
warranty.  Expendable  items,  such  as 
batteries and mounting hardware, are not 
covered  by  warranty.  Mechanical 
damage  to  equipment  due  to  improper 
use  is  not  covered  by  warranty. 
Electronic circuitry failure caused by the 
introduction  of  unregulated  or  improper 
excitation  power  or  electrostatic 
discharge is not covered by warranty.

 

Contact  Information  -  International 
customers  should  direct  all  inquiries  to 
their  local  distributor  or  sales  office.  A 
complete  list  of  distributors  and  offices 
can  be  found  at  www.pcb.com. 
Customers within the United States may 
contact their local sales representative or 
a  

f a c t o r y  

c u s t o m e r  

s e r v i c e  

representative.  A  complete  list  of  sales 
representatives  can  be  found  at 
www.pcb.com.  Toll-free  telephone 
numbers  for  a  factory  customer  service 
representative,  in  the  division 
responsible  for  this  product,  can  be 
found on the title page at the front of this 
manual. Our ship to address and general 
contact numbers are:

 

PCB Piezotronics, Inc.

 

3425 Walden Ave.

 

Depew, NY 14043 USA

 

Toll-free: (800) 828-8840

 

24-hour SensorLine

SM

: (716) 684-0001

 

Website: www.pcb.com

 

E-mail: [email protected]

 

 

 

All manuals and user guides at all-guides.com

Содержание 682A09



















Отзывы: