INSTALLATION GUIDE
• Installation diagram
Manual injection system installation
This method is applicable for the kitchen
with great condition that hoses and cords
are placed well. Detail steps
D
and团
are listed below.
一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一，
i Tip: For the first time use, the water injected may turn yellow and there may be some water ;
: remained in the dishwasher. These are all normal because every dishwasher have been
:
i tested with water and water may remain in the dishwasher. Please run a few times of Rapid ;
: program to flush remained water in it.
＿ ＿ ＿ ＿ ＿ ＿ ＿ ＿ ＿ ＿ ＿ ＿ ＿ ＿ ＿ ＿ ＿ ＿ ＿ ＿ ＿ ＿ ＿ ＿ ＿ ＿ ＿ ＿ ＿ ＿ ＿ ＿ ＿ ＿ ＿ ＿ ＿ ＿ ＿ ＿ ＿ ＿ ＿ ＿ ＿ ＿ ＿ ＿ ＿ ＿ ＿ ＿ ＿ ＿ ＿ ＿ ＿ ＿ ＿ ＿ ＿ ＿ ＿ ＿ ＿ ＿ ＿ ＿ ＿ ＿ ＿，
• Installation steps
回Installation of the inlet hose(Manual in」ection)
Tap
飞，
Inlet port
`
l
1. Find the inlet port at the back : 2. Please connect the narrower : 3. For this way of injecting water,
of the appliance, connect , end of the hose
to
the tap. , please tighten the stopper
the wider end of the hose on,
, on the suction port to avoid
it and tighten it clockwise. :
: leakage from it.
05
