Introduction
This instruction manual is for your safety and must be adhered to at all times. Please read, ensure that you fully understand
the installation and set up procedures as explained and if you are unclear on the installation or set up of your VIBE SLICK
speakers please contact your nearest authorised VIBE dealer.
Contents
2 x SLICK series speakers.
2 x Grills. (excluding 5x7)
8 x Fixing screws.
1 x Cut out template.
2 Lengths of speaker cable.
Warranty card
WARNING
DO NOT EXPOSE THIS PRODUCT TO DAMP OR MOISTURE - doing so may result in fire, shock or damage to the product.
ENSURE GOOD AND CORRECT CONNECTIONS - failure to make the correct connections may result in fire or damage to the product.
KEEP THE VOLUME AT A LEVEL SO YOU CAN STILL HEAR OUTSIDE NOISE - failure to do this may result in an accident. VIBE equipment is
capable of producing sound levels that can permanently damage your hearing. VIBE recommends caution when listening at high volume. For
safe and enjoyable listening the sound should be comfortable and clear without distortion.
CAUTION
Never connect any speaker lead to the car chassis. This can cause severe damage to your speaker /car radio /amplifier.
Before drilling or cutting any holes, investigate the layout of your vehicle thoroughly.
Use caution when working near the fuel / hydraulic lines and electrical wiring.
Observe the correct polarity when wiring, improper phasing may cause a loss of bass response.
Ensure that no moving parts catch on the speaker or grill (e.g. window or door handles, or window glass inside the door)
Installation
The quality of the installation will affect the system performance and reliability.
Contact your nearest authorised VIBE dealer if you are unsure about the installation of this product.
Please mount this unit away from any potential hazards.
Minimising the length of wires will provide higher audio output from the system.
The speaker should be securely fastened to the mounting position using the screws provided.
Pre drill your mounting holes using a drill and position with the template provided.
Be sure to investigate your mounting area thoroughly for electrical wires, brake or fuel lines or fuel tank to prevent causing any damage.
Congratulations on purchasing your SLICK speakers, please read this manual
in order to fully understand how to get the best results from your speakers
and ensure that all advice on how to look after your speakers is followed.
Thank you for buying VIBE, we hope you enjoy listening to your product as
much as we enjoyed creating it.
VIBE R&D Division
OWNERS MANUAL
Model: SLICK 40 50 60 692 693 57
