Introduction
This instruction manual is for your safety and must be adhered to at all times. Please read
ensure that you fully understand the installation and set up procedures as explained and if
you are unsure on the installation or set up of your VIBE SA-k Series components/ coaxials
please contact your nearest authorised VIBE dealer.
Contents
2x SA-k series speakers
2x Plastic half bullet cones
2x Flush mount tweeter pods
2x Surface mount tweeter pods
2x Mesh grills
2x VIBE grill badges
8x Black adhesive pads
8x Screws
2 lengths of wire with in line crossovers
Cut out template
Standard Features
Aluminium Dome Tweeters for superior high frequency response
Pivoting Tweeters for directional sound
Interchangeable Tweeter for component or coaxial set-up
Kevlar Woofer for increased cone stiffness sensitivity
Gold Plated Terminals
Polyurethane Surround for improved damping and resistance to ultraviolet rays for longer
life
Kapton Voice Coil Former for higher power handling and increased durability
In Line Crossover
Flush and Surface Mount Tweeter Pods
WARNING
DO NOT EXPOSE THIS PRODUCT TO DAMP OR MOISTURE - doing so may result in fire,
shock or damage to the product.
BEFORE WIRING DISCONNECT THE CABLE FROM THE POSITIVE BATTERY TERMINAL -
failure to do so may result in electric shock or injury.
ENSURE GOOD AND CORRECT CONNECTIONS - failure to make the correct connections may
result in fire or damage to the product.
DO NOT USE FUNCTIONS OF THIS EQUIPMENT THAT MAY TAKE YOUR CONCENTRATION
AWAY FROM DRIVING YOUR VEHICLE - do not set up your amplifier whilst driving, doing so
may result in an accident. For prolonged setting up, make sure that your vehicle is
stationary and in a safe location.
KEEP THE VOLUME AT A LEVEL SO YOU CAN STILL HEAR OUTSIDE NOISE - failure to do
this may result in an accident. VIBE equipment is capable of producing sound levels that can
permanently damage your hearing. VIBE recommends caution when listening at high volume.
For safe and enjoyable listening the sound should be comfortable and clear without
distortion.
Содержание SA-k Series
Страница 7: ...Specifications ...
