Vibe BLACKDEATH6C-V6, Руководство пользователя

Страница: 7 / 12

Flush Mount Installation (Cont)
Figure B
The second requires the use of the metal strip provided. (See Figure B)
• After finding a suitable position for the tweeters place the cut out template for the
tweeter in position and mark around it.
• Before cutting the holes double check that no brake, fuel lines or wiring harnesses are
likely to get damaged.
• Ensure that the tweeter when fitted will not catch on any moving parts such as door /
window handles.
• If mounting in a door check that the window can still be fully lowered before installing.
• Cut out the hole carefully.
• Position the metal strip fixing strip centrally, behind the cut out hole.
• Using the fixing screws attach the base of the tweeter case to the metal strip.
• Pass the tweeter cable through the central hole in the bottom of the case and the metal
fixing strip.
• Pull the cable tight until the tweeter sits in the base.
• Screw the top of the tweeter casing to the base taking care not to over tighten.
7