Vibe BlackDeath 5 MONO 14K, Руководство пользователя, Страница: 6 / 12

1. High / Low level input
For connection to any source (headunit). For high level input Connect an RCA plug to the speaker
output of the headunit making sure that the positive wire is connected to the centre pin. Low level
input is your RCA output from the source.
Note : Please ensure that the input mode select switch is set to the appropriate mode for your chosed
connection.
2. CH Input mode select switch
This switch is used to select the input mode for the amplifier. HIGH is for speaker level connection to
the headunit and LOW is for low level (RCA) connection to the headunit.
3. Remote level control port
For connection to the supplied remote level control for the amplifier.
4. Gain control
This control is used to match the input signal of the source to the amplifier.
See the setup section for more details.
5. Low Pass Filter (LPF) Crossover frequency control
This control is used to set the crossover frequency for the low pass filter of the amplifier.
The frequency is adjustable between 10Hz and 100Hz.
6. Low Pass Filter (LPF) frequency multiplier switch
This switch is used to select the frequency multiplier for the low pass filter.
x1 and x5 settings are selectable.
7. High pass Filter (HPF) Crossover frequency control
This control is used to set the crossover frequency for the high pass filter of the amplifier.
The frequency is adjustable between 50Hz and 1.5kHz.
8. High Pass Filter (HPF) frequency multiplier switch
This switch is used to select the frequency multiplier for the High pass filter.
x1 and x10 settings are selectable.
9. Bass boost control
This control is used to add bass boost to the amplifier and is variable between 0dB and +12dB and is
centered at 45hz
10. Clip / Power / Protect LED
If the amplifier is operating normally, the GREEN LED will illuminate.
If the amplifier is in protection mode the RED LED will illuminate.
if the amplifier is being driven into clipping, the ORANGE LED will illuminate.
1 2 3 4 5 6 7 8 9 11 11
10
6
Terminals And Connections