Page 1
SP Series User Manual
Gain Link
This option links the function of the two
gain controls, allowing both channels to
be adjusted simultaneously by either gain
control. When GAIN LINK is ON, either
gain control will affect both channels.
When the option is OFF, gain controls are
independent.
To change between gain link settings
enter setup mode using the CH B encoder.
Release the encoder whenGAIN LINK
SETUP is displayed. Rotate the encoder
to select between ON and OFF. Press and
release the encoder to save the setting
and exit setup mode.
•
Default Setting: OFF
Security
This option allows the user to lock out the
front panel controls preventing tampering
and adjustment.
To lock the controls enter setup mode
using the CH B encoder. Release the
encoder when SECURITY SETUP is
displayed.
Rotate the encoder to select ON. Press
and release the encoder to save the
setting.
The display will prompt you to enter a
four character security code. The code
can include any combination of letters,
numbers and symbols in the system.
Rotate the encoder to display the first
character of the desired security code.
Press to select and advance the prompt
to the next character. Repeat until all four
characters have been selected.
Once all characters have been entered
you will be prompted to confirm the
security code. Repeat the steps outlined
above.
Successful confirmation of the security
code will immediately lock the front panel
controls and exit setup mode.
When security mode is active pressing or
turning the controls will prompt the user
for the security code. Successful entry of
the stored code will unlock the controls.
•
Default Setting: OFF
