Flow Valve
A simple flow control valve is recommended to allow “tuning” the vibrator to the desired force
necessary for solving your material flow problem. The air flow determines the force and
frequency of the vibrator. By throttling the air flow, you can “find” the desired material discharge
rate. You should watch for and avoid speeds (frequency) at which the binwall and the vibrator
shake violently. An increase or decrease of air flow (assuming the mount is rigid) usually stops
the excessive movement and will smooth out the operation.
Quick Opening Valves
These are recommended between the air regulator and the vibrator so that the air enters the
vibrator at full starting force even at low regulator valve settings. The only requirement is that
you install the air regulator at least 12 inches away from the quick opening valve so that the
air pressure between the two valves will build up enough to yield the necessary starting force.
Solenoid (quick opening) valves are suggested for automatic operations. Automatic Timed
Cylcling is programmed with the timer usually directly connectd to the bin or hopper gate switch.
When the gate is opened the timed cycling system is activated.
Air Filter
It is recommended that you use an air filter in the line. Clean air will prolong the life of any
pneumatic vibrator. Dirty or moist air will harm the unit and impair it from operating at maximum
efficiency and lowest air consumption.
Air Line To Vibrator
The hose to the inlet port of the vibrator should have the same or larger hose I.D. as the inlet
I.D. (pipe size) of the vibrator, so that the pressure loss from the compressor to the vibrator is
minimized.
TURBINE MODEL
NUMBER
MIN AIR
HOSE DIA
MIN FR*
THREAD DIA
CFM
100 - 130
1/8"
1/4"
4 - 6
160 - 250
1/4"
1/4"
7 - 10
320 - 380
3/8"
3/8"
10 - 18
440 - 510
1/2"
1/2"
18 - 21
570
3/4"
3/4"
21 - 30
* F=filter R=regulator
** these specs for installation of single unit;
for multiple units, adjust to maintain CFM
TO DETERMINE CORRECT AIR HOSE SIZE**
10
PHONE ORDER: 1-800-633-0032 FAX: 1-401-539-2584
WWW.VIBCO.COM [email protected]
DO NOT LUBRICATE!
Timer
Flow
Valve
Air
Filter
Air
Regulator
Solenoid
Valve
To Control
Switch
To Gate
Содержание BBS-100
