Viavi T-BERD MTS 5800, Руководство по началу работы

Страница: 146 / 296

Chapter 4 Basic Testing
Step 5: Viewing test results
T-BERD/MTS/SC Getting Started Guide
Page 122 22046537, Rev. 016 March 2018
The Histogram display appears.
2 You can modify the default display as follows:
– To view the complete histogram, select Full Size view (see “Changing the result layout”
on page 119 ).
– To scroll horizontally through the display, use the arrow keys at the top of the pane.
– To change the histogram interval, select the arrow keys to the right of the interval button
(illustrated as “Sec” in Figure 69 ), and then select the new interval (Min, Hour, or Day).
About the Event log
An event log is a display listing any errors, anomalies, alarms, or defects that occur
during the course of your test. The log displays the value for each event, and provides
the date and time that the event occurred.
Viewing an event log
To view an event log
1 Select the Summary group, and then select the Event Log category.
Figure 69 Histogram display (full size)
NOTE:
Histograms are not available when running IP Video applications; however, an
event log is available.