Viavi T-BERD 6000A V2, Руководство пользователя

Страница: 53 / 188

Chapter 5 Power meter, VFL (Visual Fault Locator) & Talkset
Remote screen function via Talkset
User Manual 76100000200 Rev. 001 33
4 According to previous configuration, adjust Hands-free Volume
and/or Headset Volume (from 0 to 100).
Disconnection
When communication is over, deactivate the Talkset/Datalink function
on one of the 6000A V2 Platform. This deactivation can be done by either
6000A V2 Platform.
Then, the fiber used for Talkset can be disconnected safely.
Remote screen function via Talkset
This enables an operator at one end of an optical link to take control over
another 6000A V2 Platform connected at the other end, using the fiber.
VNC configuration
Before it can be remote-controlled, the 6000A V2 Platform must be
configured as explained in
“Remote Screen” on page 64 .
Connections
At each end of the fiber (see Figure 13 on page 31 ): connect the fiber to
the Talkset port of the 6000A V2 Platform, either directly or through
jumpers.
Remote screen via VNC is done via the data transfer feature, and on the
same fiber as the optical telephone.
Establishing communication
On the caller 6000A V2 Platform, press the
H
OME
button, then select and
confirm the Talkset option:
1 If the remote instrument is ready to receive (on standby), the Data
icon turns orange, beeps are emitted, and the icon
appears at
the top of the screen: data transfer can now take place.
If the remote instrument is not ready to receive, the Data icon does
not change color and a message is emitted.
2 Click next on Expert tools , Remote Display , and on Switch to
remote screen .
NOTE
Each end of the optical link must be provided with a 6000A V2 Plat-
form equipped with the Talkset option.