Viavi T-BERD 6000A V2, Руководство пользователя

Страница: 51 / 188

Chapter 5 Power meter, VFL (Visual Fault Locator) & Talkset
Talkset/Datalink Function
User Manual 76100000200 Rev. 001 31
Talkset/Datalink Function
The option enables two operators at opposite ends of an optical link:
– To communicate along the fiber.
– To transfer data along the fiber.
Each end of the optical link must be provided with a 6000A V2 Platform
equipped with the Talkset option.
Talkset
configuration
The talkset configuration is set in the System Settings screen, in the
Audio box (see "Adjusting volume level" page 32 )
Connections
At each end of the fiber:
1 Connect the fiber to the Talkset port of the 6000A V2 Platform, either
directly or through jumpers.
The Talkset connector is set with a FC adapter by default.
2 A headset (with earphones and a microphone) supplied with the
option may also be plugged into the 6000A V2 Audio jack.
n
NOTE
It is possible to use the talkset of the 6000A V2 Platform and to carry
out measurements at the same time, on a different fiber.
NOTE
It is possible to use the Data transfer feature while using the optical
telephone of the 6000A V2 Platform. Nevertheless, the data transfer
speed will be slightly decreased.
Fig. 13 Installation for Talkset use