Viavi T-BERD 6000A V2, Руководство пользователя

Страница: 167 / 188

Chapter 16 Maintenance and Troubleshooting
Maintenance procedure
User Manual 76100000200 Rev. 001 147
The list of the software versions available on the PC is displayed
next to the versions installed on the 6000A V2 Platform (see
Figure 94 on page 146 ).
Installation from a
USB memory stick
You must be equipped with a USB memory stick with a minimum
capacity of 128 Mo.
Before installing the upgrade, you must format the USB memory stick
(see
“Formatting the USB memory stick onto the 6000A V2 Platform” on
page 155 ).
1 Once formatted, disconnect the USB memory stick from the 6000A
V2 Platform using the key
Eject USB in the Media Utilities page.
2 Connect the USB memory stick to the PC
3 Unzip the upgrade files on the PC and transfer it to the USB stick:
a Download and save on your PC the .exe upgrade file that you
can get from the web (see
“Downloading from Internet” on
page 144 ).
b Once the transfer is completed, double click on the .exe file: A
window will appear. Check that the folder is correct i.e. the USB
memory stick driver is appearing in the line at the bottom of the
dialog box then press OK. If not, click on the icon
in order to
select the right USB drive.
c Press OK and wait for the end of loading.
4 Then remove the USB memory stick, using the appropriate proce-
dure, from your PC
5 Insert the memory stick into one of the USB ports on the Platform.
As for any media formatting, please note that all data present on the
USB memory stick will be irremediably lost.
Fig. 95 List of software update