Viavi T-BERD 6000A V2, Руководство пользователя

Страница: 161 / 188

Chapter 16 Maintenance and Troubleshooting
Maintenance procedure
User Manual 76100000200 Rev. 001 141
4 Set back the cover, then the module pack onto the base pack
5 If necessary plug the equipment to charge the battery
6 Switch on the 6000A V2 Platform.
7 Press H
OME
hard key to display the Home page and press System
Settings menu key to display the WIFI/Bluetooth parameters..
If the options have not been detected, turn off the instrument and
check the installation into the base.
Cleaning
Cleaning plates
and housings
The front and rear plates and the housings may become tarnished with
handling. To clean them, use only a rag moistened with soapy water.
Never use any product containing acetone, trichloro-ethylene, benzine or
alcohol, as these will attack the printed markings.
Cleaning the
screen
To clean the screen, use an antistatic product.
Cleaning the
optical cable
connector
– Use a non-linting type of paper, such as Joseph paper, soaked in
isopropylic alcohol.
– Pay particular attention to the polished face of the fiber, rubbing it in
a direction perpendicular to the axis of the fiber.
Fig. 89 WIFI / Bluetooth option installation
Bluetooth
dongle
WIFI key