OLS-85/OLS-85P
51
C
ONFIGURING
THE
D
IGITAL
P
ROBE
7 P
ROBE
/PCM O
PERATION
Fig. 18 Pass/Fail analysis – overlay view
Magnification Control
The Magnification Control allows you to modify the live display
from high to low magnification and vice-versa. In the high
magnification mode an automatic centering is available.
Picture selected: Live
Picture selected: Test
Save allows you to save the selected picture in the current
selected group in the disk of the instrument. Press the
[
G
]
key,
enter a name for the JPG file, and validate.
Overlay allows you to display or hide the limits of each zone and
the defaults on image from a test result.
Magnification Control allows you to switch all the images from
Digital Probe test results from high to low magnification and
vice-versa.
Saving the test result in a JPG file
Once the test has been performed and the result is displayed on
the OLS-85 screen:
1.
Click on the
[
G
]
key to save a JPG file of the test result in the
currently active group on the OLS-85.
2.
On the edition keypad, enter the name of the JPG file.
3.
Press Enter to validate and save the document.
Test
Allows you to launch a (new) test of the connector
“Launching a test of the connector and fiber
)
Freeze
Allows you to freeze the live image and to save it
later on the disk. Once this key is pressed, the freeze
image is automatically set to position 2.