Viavi OneAdvisor ONA-800, Руководство по началу работы

Страница: 56 / 75

Chapter 3
Powermeter and VFL
Using the power meter
ONA-800 Getting Started Guide
April 2022 22142812, R011 Page 37
Saving the configuration in a file
Once File and Measurement parameters have been configured, those parameters can
be saved to a configuration file. This configuration file can then be recalled in order to
be applied when the Powermeter measurements are performed.
To save parameters in a configuration file:
1 Press the Save softkey.
A keypad is displayed, as shown in Figure 29 .
Figure 29 Save keypad
2 Enter a name for the configuration file (max 20 characters).
3 Press the Checkmark button to validate.
The configuration file is saved with the extension ‘ .fo_cfg ’ and can be recalled at any
time from the File Explorer page.
Loading an existing configuration
You can load a configuration file previously created or available on the platform.
To load an existing configuration from the File Explorer:
1 Select the File softkey.
2 Select the desired configuration file.
3 Press Load > Load Trace + Config .
4 Press the Exit key, then select Setup to display the configuration parameters
saved in the selected configuration file.