Viavi OneAdvisor ONA-800 Скачать руководство пользователя страница 43

Страница: 43 / 75

Chapter 2

Setting up the system

Updating the system software

ONA-800 Getting Started Guide

Page 24

22142812, R011

April 2022

Using Windows Explorer, navigate to the software file, double-click the file, and

then click

Run

In the dialog that appears, click

Browse

to navigate to and select the USB drive.

Click

Extract

to initiate extraction of the system software files to the USB drive.

Do not unplug the drive from the PC while the files are extracting.

When all the files are extracted, navigate to the USB drive, right-click the name of

the drive, and then click

Eject

Unplug the USB drive from the PC.

If required, go to

“Performing a software update using a USB drive”

Performing a software update using a USB drive

Confirm the following:
–

The unit will have an uninterrupted supply of power during the software

update. If necessary, connect the AC power adapter to the unit.

–

A USB drive on which the extracted system software files are saved is

available.

Plug the USB drive into the USB connector on the top panel of the unit.

Select

System

on the menu bar, select

Upgrade

, and then select

USB

The release number of the software available on the USB drive appears. Note the

following symbols that may appear beside the release number on the USB stick:
–

An equals symbol indicates that the software on the USB stick and the

software on installed on the unit are the same (that is, have the same release

number).

–

A down-arrow symbol indicates that the software on the USB stick is an

earlier release than the software installed on the unit.

–

An up-arrow symbol indicates that the software on the USB stick is a later

release than the software installed on the unit and the system software can

be upgraded to the later release.

To upgrade to a later release, select

Start Upgrade

A dialog box appears with prompts to either exit all tests that are running or cancel

the update if the tests cannot be stopped.

Select

to proceed with the software update. Do not unplug the USB drive from

the unit during the update.
The unit automatically restarts when the update is completed.

After the unit has restarted, unplug the USB drive.

WARNING:

Electrical shock may result in serious injury or death. Be sure the AC power adapter

is connected to the correct voltage mains. Do not use the adapter outdoors or in wet

locations. Use only the AC power adapter supplied with the unit.

Содержание OneAdvisor ONA-800












































































Результаты поиска

Содержание OneAdvisor ONA-800

Отзывы:

Похожие инструкции для OneAdvisor ONA-800

Бренды по названию

Популярные бренды

Viavi OneAdvisor ONA-800, Руководство по началу работы

Результаты поиска

Содержание OneAdvisor ONA-800

Отзывы:

Похожие инструкции для OneAdvisor ONA-800

Бренды по названию

Популярные бренды