VIAVI Solutions
Contact Us +1 844 GO VIAVI
(+1 844 468 4284)
To reach the VIAVI office nearest you,
visit viavisolutions.com/contacts.
© 2019 VIAVI Solutions Inc.
Product specifications and descriptions in this
document are subject to change without notice.
Connect to Fiber Under Test (FUT):
The MP-60/80 may be connected to the Fiber under test via an optical patch panel (OPP) or an
optical coupler. All fibers and connectors should be inspected and clean prior to connection:
1.
Insert the MP-60 or MP-80 into a USB port on the top of the T-BERD/MTS-2000.
2.
If the interface to the Fiber Under Test is a patch cable, connect the patch cable to an optical
coupler with the same connector type.
3.
Insert the Jumper Cable into MP-60 or MP-80 optical power meter.
4.
Connect the Jumper Cable to the coupler or the OPP leading to the light source.
Figure 3: Connecting the Power Meter to an OPP or Coupler
Launch Test:
1.
Press the power button
to turn on the
test set.
2.
Tap the
USB Powermeter
icon in the
Home
Screen
to access the LTS (Loss Test Set) Screen.
Figure 4: Home Screen
Measure Absolute Power:
1.
Tap the
Wavelength
soft key set the
wavelength.
2.
Tap the
Display Units
soft key to set units to
dBm
.
3.
View the power level in the
Power Meter on
USB
display in the center of the screen.
Figure 5: LTS Screen
