Chapter 6
mA-6806 Vector Signal Transceiver User Interface Client
VST Receiver
Final
mA-6806 AXIe Vector Signal Transceiver Operation Manual
Rev. C0
Page 54
July 2019
Y AutoScale Tick Box
This tick box enables or disables the auto-scaling for the vertical scale (Y-axis) of the
plot field. When AutoScale is enabled, the plot field's vertical scale is adjusted to
values that display the entire vertical range of the waveform.
Marker Controls
Refer to the section titled
for information about marker
functions.
Plot Markers
The Time Plot and Spectrum Plot support basic marker functions. Time Plot Markers are
added and configured on the Time Plot Panel; Spectrum Plot Markers are added and
configured on the Spectrum Plot Panel. When a marker is added to the Plot Field the area
below the Plot Field updates to display that Marker Measurement Bar and other marker
controls and functions are enabled. The image below shows an example of Time Plot
Markers.
Figure 28
Time Plot with Markers Enabled
