3 — Quick start for experienced installers
Quick start for experienced installers
First time installers should use the
installation instructions (page 4)
the next page.
Caution:
Do not attempt in-cabinet repairs of your appliance.
The appliance is very heavy! Always use a server lift or work
with a partner to install or remove the appliance from the cabinet
to perform any maintenance.
1.
Mount the head unit and all JBODs in your cabinet. Refer to the
instructions on
2.
Connect the cables.
●
Power
●
SAS
●
Ethernet
●
TAP/Span
●
IPMI (optional)
3.
Insert the transceivers.
4.
Connect the KVM.
5.
Turn on the JBODs.
Caution:
JBODs must be turned on before the head unit. The
drives do not properly initiallize if the JBODs are not started
first. If this happens, restart the head unit.
6.
Turn on the head unit (A1).
7.
Set the ip address.
